Arcona 435 MK II

20/12/21

The Mark II version of the Arcona 435 has the following updates:

    • New semi-integrated bowsprit.
      A smoothened out joint between the bowsprit and hull.
      The Code Zero will be mounted (as standard) on the tip of the bow, this will make it possible to work without a bobstay and therefore make it easier when anchoring.
      For hard racing we however still recommend a soft bobstay to be fitted to the front of the bowsprit to avoid unnecessary stress.
    • The hull height is raised so that there is +80mm in the bow and +100mm in stern, for increased headroom internally. This makes the height 200cm from floor to ceiling at the accommodation hatch and 189cm at the main bulkhead.
    • Hull dimensions have increased adding 60mm on each side which means the new beam is approx. 4.2m. We’ve also added about 100mm of hull length.
    • The hull windows have changed.
      The three windows in the hull are larger and covered in a white printscreen that blends beautifully into the hull of the yacht, enables lots of natural light to come in and privacy too.
    • The rig has the same aspect rig as standard however the Q measurement has been updated with a 60mm longer pipe.
    • Deckware.
      The options list now includes a new double bend self-tacker for low installation.
      2 Tackline pipes – Under deck (coachroof) as standard.
      Optional Cutter stay reinforcement.
      Optional electro-hydraulic backstay (Reckmann) with two pushbutton controls.
    • Interior.
      Part wood veneer finish in both heads.
      Due to proximity of back burner, only 2 burner stoves can be fitted however this does not apply to electric hobs.
      New extra storage locker under galley lockers.

Menu